Step 1: Unpack The Printer; Setting Up A Multifunction Printer; Preparing For Setup - Lexmark T630 Setup Manual

Step 1: Unpack the printer

Setting up a multifunction printer

Preparing for setup

CAUTION:
The printer weighs
17.3–19 kg (38–42 lb) depending on the model, and
requires at least two people to lift it safely.
1.4 m
(4.5 ft)
30 cm
(12 in.)
51 cm
(20 in.)
Note:
Leave the printer in the box until you are ready to
install it.
30 cm
(12 in.)
30 cm
(12 in.)
Unpack the printer
3
If you purchased a multifunction printer
(MFP) that copies, faxes, and scans,
refer to the documentation that came with
the device to see if furniture or other
hardware needs to be set up first.
Make sure you are ready to begin setting
up the printer.
1
Select a location for your printer.
• Leave enough room to open
the printer trays, covers, doors,
and options. It is also important
to allow space around the
printer for proper ventilation.
• Provide the proper
environment:
– A firm, level surface
– Away from the direct airflow
of air conditioners, heaters,
or ventilators
– Free of sunlight, humidity
extremes, or temperature
fluctuations
– Clean, dry, and free of dust