Lexmark T630 Setup Manual page 31

Slots
Tabs
Set up the printer and print media handling options
4
If you are mounting the output
expander on the printer or another
output expander, attach the wire
bail. Place the tips of the wire bail
into the ends of the plastic bracket
so that the bail curves downward.
The wire bail rests in the output bin
of the output expander below it, or
in the standard output bin.
5
Slide the lower tabs on the tray into
the lower slots on the output
expander.
6
Rotate the tray up until the upper
tabs snap into the upper slots.
7
If you are not attaching any more
print media handling options,
attach the top cover to the output
expander.
26