Installing An Output Expander - Lexmark T630 Setup Manual

Installing an output expander

Warning:
The output expander bin is designed to hold
the weight of print media only. Excess weight may cause
it to disengage from the support.
Bin
Labels
Note:
If you have purchased a finisher or a high-capacity
output stacker, that print media handling option must be
installed directly on the printer, before the output
expander.
Bracket and wire bail
Set up the printer and print media handling options
4
5
Each output expander consists of a
support and a removable bin. A wire bail,
bracket, and labels are also included.
After you carefully unpack the output
expander, install it immediately;
otherwise, the edges of the mounting
brackets could damage tabletops or
fabrics.
Support
24
Place the tips of the wire bail into
the ends of the plastic bracket so
that the wire bail curves
downward.
The wire bail rests in the printer
output bin.
If you are not attaching any more
print media handling options,
attach the top cover to the
high-capacity output stacker.