Lexmark T630 Setup Manual page 44

Size indicators
Width guide
tab
Length guide
Width guide
Load print media
39
2
Squeeze the width guide tab and
the side of the guide as shown.
Slide the width guide to the far
right side of the tray.
3
Squeeze the length guide lever
and slide the length guide to the
correct position for the size of print
media you are loading. Notice the
size indicators on the left side of
the tray.
4
Place the print media into the tray
with the recommended print side
face down for single-sided printing
and face up for double-sided
printing. Do not load print media
above the load line. Overfilling the
tray may cause jams.
5
Squeeze the width guide tab and
the side of the guide together.
Slide the width guide to the left
until it lightly rests against the
edge of the print media stack.
6
If you are loading an optional tray,
adjust the knob to show the size of
the print media currently loaded.
This setting serves as a visual
reminder only; it has no effect on
the operation of the printer.
7
Insert the tray.