Lexmark T630 Setup Manual page 12

2000-sheet drawer
16 AWG power cord
Note:
The 16 AWG power cord is included only with units
intended to operate at 100–127V power.
Jumper cord
Set up the printer and print media handling options
2
Remove all packing material and
tape from each item.
Decals
3
Peel the appropriately numbered
decals from the sheet and attach
them to the recessed areas on the
1 1 drawer. Choose the number that
2 2
corresponds to the total number of
3 3
4 4
trays you are using, including the
5 5
standard tray.
Save the carton and packing
material in case you need to
repack the 2000-sheet drawer for
service or storage.
7