Installing An Optional Flash Memory Or Firmware Card - Lexmark T630 Setup Manual

Note:
Some memory and firmware options offered for
other Lexmark printers cannot be used with your printer.
Refer to the Publications CD for specifications.
Notch
Latch
Notch
Installing an optional flash memory
or firmware card
Ridge
Install memory and option cards
33
3
Align the notches on the memory
card with the ridges on the
connector.
4
Push the memory card straight
into the connector until it snaps
into place. Make sure each latch
fits over the notch located on either
side of the memory card.
Follow the instructions in this section to
install an optional flash memory or
firmware card. The system board has two
connection locations which can support a
total of one flash memory card and one
firmware card.