Warning Messages - Lexmark Optra Optra T Administrator's Manual

Warning messages

Warning message
<linked set bin name> Full
Bin x Full
<bin name> Full
Check Config ID
Fax
Fax x
Infrared x
LocalTalk x
Maintenance
Network x
Network x, y
Ovrflow Bin Full
Understanding Printer Messages
Warning messages display on the second line of the operator panel. If
none of the following conditions exist, line 2 of the operator panel is
blank.
Meaning
One of the linked set of output bins is full.
This message only displays when
See page 20 for details.
The linked set of output bins is full, where x represents an output bin 1 through 10 and
defined name.
This message only displays when
The printer configuration identification (ID) is not set or is not valid. Call Lexmark Customer Support.
The printer is processing a fax through the standard serial port.
The printer is processing a fax through port x, where x represents the active interface port.
The printer is locked onto infrared interface port x, where x represents the active communication link.
The printer is locked onto LocalTalk interface port x, where x represents the active communication link.
The printer requires replacement of routine maintenance items to maintain top performance, and avoid print
quality and paper feed problems.
This message displays until maintenance is performed and the printer maintenance counter is reset. See
"Maintaining Your Printer" on page
The printer is locked onto network interface port x, where x represents the active communication link.
The printer is locked onto a network interface port, where x represents the active communication link and y
represents the channel.
The designated overflow bin is full.
This message only displays when
<linked set bin name>
Configure Bins is set to Mailbox,
Configure Bins is set to Link, or
122.
Configure Bins is set to Mailbox
102
represents a user-defined name.
Mailbox Overflow, or Type
<bin name>
Link Optional. See page 20
Overflow. See page 20 for details.
Assignment.
is a user-
for details.