Lexmark Optra Optra T Administrator's Manual page 16

Paper Menu (continued)
Menu item Values
PAPER SIZE Env Feeder Size
(continued) Manual Env Size
Each of the above menu items support the following values as a second menu:
7 ¾ Envelope
9 Envelope
10 Envelope* (Country specific)
DL Envelope* (Country specific)
C5 Envelope
B5 Envelope
Other Envelope
The PAPER SIZE
sensing. This means the printer automatically determines the size of print material loaded in the paper source.
Note: Before loading print material in any paper source, make sure you set the
the paper source. Also, select the paper size and the type from your software application for the print material you are
loading.
Select
Select
Universal
you load print material that doesn't match any of the other available sizes. The printer automatically formats the page for
the maximum possible size. You can then set the actual page size from your application software.
Select
available sizes. The printer automatically formats for the maximum possible envelope size. You can then set the actual
envelope size from your application software.
*Factory default
Using the Operator Panel and Menus
setting identifies the default formatting size for each paper source. Some paper sources have size
Manual Pap Size when manually feeding a single sheet of print material through the multipurpose feeder.
Manual Env Size when manually feeding a single envelope through the multipurpose feeder.
refers to any size that is not considered a standard size. Select
Other Envelope from the PAPER SIZE
Universal
menu when you load envelopes that do not match any of the other
16
PAPER SIZE and the PAPER TYPE
from the PAPER SIZE menu when
for