Usb Option - Lexmark Optra Optra T Administrator's Manual

N :
OTE USB OPTION x only displays if a
USB/Parallel interface card is installed.
USB Menu
Menu item Values
PCL SmartSwitch Off
On*
PCL SmartSwitch
If
if the data indicates that is the printer language.
If both PCL SmartSwitch
Language
PS SmartSwitch Off
On*
If PS SmartSwitch
PostScript emulation if the data indicates that is the printer language.
PCL SmartSwitch
If both
Language
* Factory default
Using the Operator Panel and Menus
USB Menu
Use the USB MENU to change settings affecting the Universal Serial
Bus (USB) interface port. It displays as:
is set to On, the printer examines the data on the USB interface connection and selects PCL emulation
and PS SmartSwitch
menu as the default. If only one SmartSwitch is set to On, the printer uses that language as the default.
is set to On, the printer examines the data on the specified USB interface connection and selects
PS SmartSwitch
and
menu as the default. If only one SmartSwitch is set to On, the printer uses that language as the default.
• USB OPTION x (where x represents USB port 1 or 2)
are set to Off, the printer uses the language specified in the
are set to Off, the printer uses the language specified in the
81
Printer
Printer