Lexmark Optra Optra T Administrator's Manual page 54

Setup Menu (continued)
Menu item Values
Job Accounting Off*
On
If you have an optional disk installed in your printer, set
about your most recent print jobs. The statistics include whether the job printed with or without errors, the time required to print
the job, the size (in bytes) of the job, the requested paper size and paper type, the total number of printed pages and the
number of copies requested.
Job Accounting
100%. 61 Defective Disk
If your printer has a hard disk installed, it is capable of compiling print job statistics and storing them to disk. You may print
these statistics. See
Job Acct Limit Disabled
10...1000 (1000*)
The Job Acct Limit
Size is set to 100%.
The Job Acct Limit
For example, if you set the limit to 10, the statistics from the 10 most recent print jobs are stored to disk. When the limit is
reached, the oldest print job statistics are discarded and replaced with the statistics from the print job currently being printed.
The number of jobs contained in the statistics data never exceeds the Job Accounting Limit.
Note: When
the Job Accounting Limit is modified, all print job statistics currently stored on the hard disk are cleared.
*Factory default
Using the Operator Panel and Menus
only displays if the hard disk is not defective, Read/Write or Write protected or if
displays during printer power on. See
"Job Acct Stat" on page
menu item does not display if the hard disk is defective, Read/Write or Write protected, or if
61 Defective Disk displays during printer power on. See
menu item specifies the number of print jobs for which statistics are maintained on your printer hard disk.
Job Acct Limit is set to Disabled, print job statistics are stored for each print job until the hard disk is full. When
Job Accounting to
"61 Defective Disk" on page
36.
54
On to use the disk to store statistical information
Job Buffer Size
112.
"61 Defective Disk" on page
is set to
Job Buffer
112.