Lexmark Optra Optra T Administrator's Manual page 76

Infrared Menu (continued)
Menu item Values
Job Buffering Off*
On
Job Buffering lets you delay processing of a print job. The job is temporarily stored on a hard disk before being printed,
usually freeing the host computer while the job prints.
The Job Buffering
protected, and if
during disk format and write operations. See
If Job Buffering
buffered.
Changing the
Window Size Auto*
1
The Window Size
acknowledgment to the host computer.
Select Auto
In most cases,
Window Size
* Factory default
Using the Operator Panel and Menus
menu item only displays if the installed hard disk is formatted and is not defective, Read/Write or Write
Job Buffer Size is not set to Disabled.
is set to On, print jobs are buffered to the hard disk. If
Job Buffering setting automatically resets the printer.
setting specifies the maximum number of infrared frames the printer can receive before it must send an
to let the printer automatically set the window size during a power on reset to maximize link performance.
Auto is the recommended setting. If you have trouble printing when you use the infrared port, changing the
setting to 1 may resolve the problem.
61 Defective Disk
"61 Defective Disk" on page 112.
Job Buffering
76
may display when the printer is turned on, or
is set to Off, print jobs are not