Lexmark Optra Optra T Administrator's Manual page 99
Optra series
Hide thumbs
Also See for Optra Optra T:
- User manual (123 pages) ,
- Setup manual (38 pages) ,
- Reference manual (1 page)
Table of Contents
Advertisement
Status message
Meaning and allowed action
Prog System Code
The printer is programming new system code. When the programming is completed successfully, the printer performs a
DO NOT POWER OFF
power on reset.
No button actions are possible while this message displays.
Note: Do not turn the printer off while this message displays.
Program Flash
The printer is storing resources, fonts or macros, in the flash memory. If information is written to the flash memory and to
DO NOT POWER OFF
the hard disk at the same time,
No button actions are possible while this message displays.
Note: Do not turn the printer off while this message displays.
Programming Disk
The printer is storing resources, fonts or macros, on the hard disk. If information is written to the flash memory and to
DO NOT POWER OFF
the hard disk at the same time,
No button actions are possible while this message displays.
Note: Do not turn the printer off while this message displays.
Queuing Jobs
The printer is sending one or more Print and Hold jobs selected in the print queue to print. This message displays if you
select
Queuing and
The printer is sending one or more Print and Hold jobs selected in the print queue to print. This message displays if one
Deleting Jobs
or more jobs are selected in the print queue to print and one or more jobs are selected for deletion.
No button actions are possible while either of these messages displays.
See PRINT A JOB or Print All Jobs on
Ready
The printer is ready to receive and process data.
• Press
• Press
Note: If you use the PJL RDYMSG command, a customized message may display instead of Ready. For more infor-
mation, refer to the Technical Reference.
Understanding Printer Messages
Program Flash
Program Flash
Print All
Jobs,
Print A
Job,
Menu>
or
<Menu
to take the printer out of
Stop
to take the printer offline.
displays.
displays.
Print Copies
and no jobs are selected for deletion.
page 39
for more details.
Ready
and enter the menus.
Not Ready
displays and no data is processed. Press
99
Go
to return to Ready.
Advertisement
Table of Contents
Need help?
Do you have a question about the Optra Optra T and is the answer not in the manual?