Removing printer or
flash memory
W
:
ARNING
Electronic components are easily
damaged by static electricity. Touch something
metal before you touch the memory option.
Latch
Removing Options
If necessary, refer to the
printer system board.
1
Locate the memory option you want to remove.
2
Push out on the latches at each end of the connector.
3
Pull the memory option out of the connector.
4
Place the memory option in its original packaging. If you did not
save the packaging, wrap it in paper and store it in a box.
5
If you need to install a replacement memory option or other
option on the system board, refer to the
6
Refer to the
Setup Guide
system board.
152
Setup Guide
for instructions on accessing the
Setup
for instructions on closing the printer
Guide.