Chapter 2: Understanding Printer Messages - Lexmark E350d Menus And Messages Manual

Understanding printer messages
The printer control panel displays messages describing the current state of the printer and indicates possible printer problems you must
resolve. This topic provides a list of all printer messages, explains what they mean, and tells you how to clear the messages.
The following table lists the messages in alphanumerical order. You can also locate a message using the index.
Message
Activating Demo Mode
Activating Menu Changes
Activating/Deactivating PPDS
Busy
Cancelling Job
Change Cartridge Invalid Refill
Close door
Deactivating Demo Mode
Defragmenting Flash DO NOT POWER OFF
Disabling Menus
Enabling Menus
Flushing buffer
Formatting Flash DO NOT POWER OFF
Invalid Engine Code
Invalid Standard Network Code
Load manual feeder with
<Custom Type>
Load manual feeder with
<Custom String>
Load manual feeder with <size>
Load manual feeder with <size> <type>
Action
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear, or cancel the print job.
Wait for the message to clear.
The printer has detected an unsupported refilled cartridge. Remove the indicated print
cartridge and install a new one.
Close the specified door to clear the message.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Wait for the message to clear.
Note: While the menus are disabled, you cannot change the printer settings from the
control panel.
Wait for the message to clear.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Download valid engine code to the printer.
Note: You can download engine code while this message is displayed.
The code in an internal print server is not valid. The printer cannot receive and
process jobs until valid code is programmed into the internal print server. Download
valid code to the internal print server.
Note: You can download network code while this message is displayed.
• Load the specified paper in the manual feed tray or multipurpose feeder.
• To ignore the manual feed request and print on paper already installed in one of the
input sources, press
If the printer finds a tray that has paper of the correct type and size, it feeds paper
from that tray. If the printer cannot find a tray with the correct paper type and size, it
prints on whatever paper is installed in the default input source.
• Cancel the current job.
29
.