Std Net Setup - Lexmark Optra Optra T Administrator's Manual

Network Menu (continued)
Menu item Values
Job Buffering Off*
On
Job Buffering lets you delay processing of a print job. The job is temporarily stored on a hard disk before being printed,
usually freeing the host computer while the job prints.
The Job Buffering
Write protected, and if
on, or during disk format and write operations. See
If Job Buffering
buffered.
Note: Changing the

STD NET SETUP

Values for this menu item are supplied by the specific network card. Open the menu to see the available values.
or
Refer to the documentation on the Drivers, MarkVision and Utilities CD for more details.
NETWORK x SETUP
* Factory default
Using the Operator Panel and Menus
menu item only displays if the installed hard disk is formatted and is not defective, Read/Write or
Job Buffer Size is not set to Disabled.
is set to On, print jobs are buffered to the hard disk. If
Job Buffering setting automatically resets the printer.
61 Defective Disk
"61 Defective Disk" on page
Job Buffering
73
may display when the printer is turned
112.
is set to Off, print jobs are not