Flea Power Release; Wi-Fi Power Cycle - Dell Inspiron 13 7000 Service Manual

● Solid white – Camera is in use.
● Off – Camera is not in use.
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
● Solid white – Caps Lock enabled.
● Off – Caps Lock disabled.

Flea power release

Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has
been removed. The following procedure list the steps to conduct a flea power release for the computer.
1. Shut down the computer.
2. Remove the base cover.
3. Follow step 1 in "Removing the battery".
4. Press and hold down the power button for 15 seconds to ground the system board.
5. Follow step 3 in "Replacing the battery".
6. Replace the base cover.
7. Turn on the computer.

Wi-Fi power cycle

If your computer is unable to access the internet due to Wi-Fi connectivity issues a Wi-Fi power cycle procedure may be
performed. The following procedure provides the instructions on how to conduct a Wi-Fi power cycle:
NOTE: Some ISPs (Internet Service Providers) provide a modem/router combo device.
1. Turn off your computer.
2. Turn off the modem.
3. Turn off the wireless router.
4. Wait for 30 seconds.
5. Turn on the wireless router.
6. Turn on the modem.
7. Turn on your computer.
90 Troubleshooting