NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Open the latch and disconnect the status-light board-cable from the system board.
2. Peel the foam securing the status-light board to the palm-rest assembly.
3. Lift the status-light board off the palm-rest assembly.
Figure 17. Removing the status-light board
1. latch
3. status-light board
Removing the status-light board
computer. After working inside your computer, follow the instructions in
2. status-light board-cable
4. foam
Removing the status-light board
25
After
www.dell.com/
45