Flea Power Release - Dell P63F Service Manual

Light Pattern
2,3
2,4
2,5
2,6
2,7
3,1
3,2
3,3
3,4
The computer may emit a series of beeps during start-up if the errors or problems
cannot be displayed. The repetitive beep codes help the user troubleshoot problems
with the computer.
Camera status light: Indicates whether the camera is in use.
• Solid white – Camera is in use.
• Off – Camera is not in use.
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
• Solid white – Caps Lock enabled.
• Off – Caps Lock disabled.

Flea power release

Flea power is the residual static electricity that remains on the computer even after it
has been powered off and the battery has been removed. The following procedure
provides the instructions on how to conduct flea power release:
1 Turn off your computer.
2 Remove the base
3 Press and hold the power button for 15 seconds to drain the flea power.
4 Replace the base
5 Turn on your computer.
Problem description
No memory or RAM detected
Memory or RAM failure
Invalid memory installed
System board or chipset error
LCD failure
CMOS battery failure
PCI or video card or chip failure
Recovery image not found
Recovery image found but invalid
cover.
cover.
133