NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
base
cover.
Procedure
1. Disconnect the battery cable from the system board.
2. Remove the four screws (M2x3) that secure the battery to the palm-rest assembly.
3. Lift the battery off the palm-rest assembly.
Figure 3. Removing the battery
1. system board
3. screws (4)
5. battery
4. Press and hold the power button for five seconds to ground the system board.
14
Removing the battery
Removing the battery
computer. After working inside your computer, follow the instructions in
2. battery cable
4. palm-rest assembly
5
After
www.dell.com/