Table of Contents
Advertisement
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
•
Solid white – Caps Lock enabled.
•
Off – Caps Lock disabled.
Flea power release
Flea power is the residual static electricity that remains on the computer even after it
has been powered off and the battery has been removed. The following procedure list
the steps to conduct a flea power release for the computer.
1
Shut down the computer.
2
Remove the
base
3
Follow step 1 in
4
Press and hold down the power button for 15 seconds to ground the system
board.
5
Follow step 3 in
6
Replace the
base
7
Turn on the computer.
Wi-Fi power cycle
If your computer is unable to access the internet due to Wi-Fi connectivity issues a
Wi-Fi power cycle procedure may be performed. The following procedure provides the
instructions on how to conduct a Wi-Fi power cycle:
NOTE: Some ISPs (Internet Service Providers) provide a modem/router
combo device.
1
Turn off your computer.
2
Turn off the modem.
3
Turn off the wireless router.
4
Wait for 30 seconds.
5
Turn on the wireless router.
6
Turn on the modem.
7
Turn on your computer.
cover.
"Removing the
battery".
"Replacing the
battery".
cover.
115
Advertisement
Table of Contents
