Chapter 37: Removing The Palm-Rest Assembly; Prerequisites; Procedure - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the coin-cell battery.
5. Remove the solid-state drive.
6. Remove the wireless card.
7. Remove the fan.
8. Remove the touch pad.
9. Remove the display assembly.
10. Remove the heat sink.
11. Remove the I/O board.
12. Remove the power-adapter
13. Remove the power and volume-buttons
14. Remove the status light
15. Remove the speakers.
16. Remove the system board.
17. Remove the keyboard.
Procedure
After performing the steps in prerequisites we are left with the palm rest.
66 Removing the palm-rest assembly
Removing the palm-rest assembly
computer. After working inside your computer, follow the instructions in
port.
board.
board.
37
After
www.dell.com/