Dell Inspiron 13 7000 Service Manual page 85

Table 4. System setup options—Advanced menu (continued)
Advanced
USB Emulation
USB Powershare
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Keyboard Illumination
Keyboard Backlight with AC
Battery Health
Battery Charge Configuration
Advance Battery Charge Configuration
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
Always perform Integrity Check
SupportAssist System Resolution
Allows you to enable or disable the USB emulation feature.
This feature defines how the BIOS, in the absence of a
USB-aware operating system, handles USB devices. USB
emulation is always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
Allows you to enable or disable the USB emulation feature.
Default: Enabled
Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Allows you to set the keyboard illumination.
Allows you to set the time for keyboard backlight.
Displays the battery health.
Set the battery charge settings with a preselected custom
charge start and stop.
Default: Adaptive
Enable Advanced Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
Enable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard
drive.
Default: Enabled
BIOS auto-recovery automatically recovers BIOS without
user actions.
Default: Disabled
Allows you to enable or disable the Integrity checks.
Default: Disabled
System setup 85