NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
NOTE:
The status-light board includes an LED indicator for power and battery-status light/hard-drive activity light.
1. Open the latch and disconnect the status-light board cable from the system board.
2. Lift the status-light board along with the cable off the palm-rest assembly.
Removing the status-light board
computer. After working inside your computer, follow the instructions in
Removing the status-light board
31
After
www.dell.com/
49