Underhook - AND GX-M Series Instruction Manual

18.Underhook

The underhook can be used for weighing large samples, magnetic materials or for measuring density. The
built-in underhook is revealed by removing the cover plates on the bottom of the balance. Use the
underhook as shown below.
Caution
Do not apply excessive force to the underhook.
When not in use, attach the cover plate
to prevent dust from getting into the
balance.
The weighing pan, pan support and
draft gate fall off, when turnig over the
balance. Remove them first.
1. Remove the draft gate.
2. Remove the weighing pan and pan support.
3. Turn over the balance.
4. Remove the cover plates.
5. Hang from the underhook
Step5
Hang from the underhook
.
Rubber plate
Pan support
Underhook
Step4
117
Weighing pan
Step2
Step3
Cover plates
Metal plate
Step1
Draft gate