260 Paper Jam; 270-279 Paper Jams - Lexmark X652DE User Manual

260 paper jam

Touch Status/Supplies to identify the location of the jam. The envelope feeder feeds envelopes from the bottom
of the stack; the bottom envelope will be the one that is jammed.
1
Lift the envelope weight.
2
Remove all envelopes.
3
If the jammed envelope has entered the printer and cannot be pulled out, then lift the envelope feeder up and
then out of the printer, and then set it aside.
4
Remove the envelope from the printer.
Note: If you cannot remove the envelope, then the print cartridge will have to be removed. For more information,
see "200 and 201 paper jams" on page 139.
5
Reinstall the envelope feeder. Make sure it snaps into place.
6
Flex and stack the envelopes.
7
Load the envelopes in the envelope feeder.
8
Adjust the paper guide.
9
Lower the envelope weight.
10
Touch Continue.
270–279 paper jams
To clear a jam in the high-capacity output stacker or the 4-bin mailbox:
1
Touch Status/Supplies to identify the location of the jam.
2
If the paper is exiting into a bin, then pull the paper straight out, and then touch Continue.
If not, then continue with step 3.
3
Pull down the output bin door or doors.
4
Remove the jammed paper.
5
Close the output bin door or doors.
6
Touch Continue.
280–282 paper jams
1
Touch Status/Supplies to identify the location of the jam.
2
Pull down the StapleSmart finisher door.
3
Remove the jammed paper.
4
Close the StapleSmart finisher door.
5
Touch Continue.
Clearing jams
145