Menu item
Enable DHCPv6
On
Off
Wireless menu
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only for models connected to a wireless network.
This menu is available from the Network/Ports menu:
Network/Ports
Network <x>
Menu item
Network Mode
Infrastructure
Ad hoc
Compatibility
802.11n
802.11b/g
802.11b/g/n
Choose Network
<list of available networks>
View Signal Quality
View Security Mode
AppleTalk menu
This menu is available from the Network/Ports menu:
Network/Ports
Standard Network or Network <x>
Menu item
Activate
On
Off
View Name
Description
Enables DHCPv6 in the printer
Note: On is the factory default setting.
Net <x> Setup
Wireless
Description
Specifies the network mode
Notes:
•
Infrastructure mode lets the printer access a network using an
access point.
•
Ad hoc is the factory default setting. Ad hoc mode configures
the printer for wireless networking directly between it and a
computer.
Specifies the wireless standard for the wireless network
Lets you select an available network for the printer to use
Lets you view the quality of the wireless connection
Lets you view the encryption method for the wireless connection.
"Disabled" indicates that the wireless network is not encrypted.
Std Network Setup or Net <x> Setup
Description
Activates AppleTalk support
Note: On is the factory default setting.
Shows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
Understanding printer menus
171
AppleTalk