For Macintosh Users - Lexmark X652DE User Manual

In Windows Vista
a
Click .
b
In the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP and earlier
a
Click Start.
b
Click Run.
c
Type D:\setup.exe, where D is the letter of your CD or DVD drive.
2
Click Install Printer and Software.
3
Click Agree to agree to the License Agreement.
4
Select Suggested, and then click Next.
Note: To configure the printer using a static IP address, using IPv6, or to configure printers using scripts, select
Custom and follow the on-screen instructions.
5
Select Wired Network Attach, and then click Next.
6
Select the printer manufacturer from the list.
7
Select the printer model from the list, and then click Next.
8
Select the printer from the list of printers discovered on the network, and then click Finish.
Note: If your configured printer does not appear in the list of discovered printers, click Add Port and follow the
on-screen instructions.
9
Follow the on-screen instructions to complete the installation.

For Macintosh users

1
Allow the network DHCP server to assign an IP address to the printer.
2
Print the network setup page from the printer. For information on printing a network setup page, see "Printing
a network setup page" on page 46.
3
Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you
are configuring access for computers on a different subnet than the printer.
4
Install the drivers and add the printer.
a
Install a PPD file on the computer:
1
Insert the Software and Documentation CD in the CD or DVD drive.
2
Double-click the installer package for the printer.
3
From the Welcome screen, click Continue.
4
Click Continue again after viewing the Readme file.
5
Click Continue after viewing the license agreement, and then click Agree to accept the terms of the
agreement.
6
Select a Destination, and then click Continue.
7
From the Easy Install screen, click Install.
Additional printer setup
54