Lexmark X644E Setup Manual page 57

IPDS Printer and Host Setup Guide Printer Messages and Problems
Problem 2: 36 Resolution Reduced
The message 36 Resolution Reduced displays and the printer stops.
Solution to Problem
The printer memory is full and the page cannot be printed at the selected print resolution setting. Press Go and
the page is printed at a lower resolution. If this is a constant problem and you want to print at the higher resolu-
tion, you need to add more memory to the printer.
This message is an informational message on some models. The printer will display the message and continue
printing the job without operator intervention. If this message continues to appear when printing jobs, add more
memory to the printer.
Requirements vary greatly according to type of printing and types of resources being used. For information on
the minimum recommended installed memory for various printing requirements on each supported printer, refer
to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide.
Problem 3: IPDS memory exception
Sometimes an IPDS memory exception is reported to the host.
Solution to Problem
You need to do one or more of the following:
A. Postscript or PCL resources may be saved in the printer memory. The memory cannot be used by IPDS.
Set Resource Save to "Off" to allow permanent downloaded resources from PostScript and PCL jobs to be
deleted. On printers, Resource Save is found under MENU > Setup Menu > Settings. On MFPs, it is found
under Menus > Settings > Print Settings > Setup Menu. Try reprinting the job after powering the printer
OFF and ON.
B. There may be insufficient printer memory to print the IPDS job with print resolution selected in the printer's
MENU/Menus > Option Card Menu > IPDS MENU > EMULATION >IPDS Print Res menu item. Select a
lower print resolution and try reprinting the job. If using the Adapter for SCS, you must power the printer OFF
and ON for this change to take effect.
C. There may be insufficient printer memory to temporarily store IPDS resources and print non-IPDS jobs. Add
more memory to the printer. Requirements vary greatly according to type of printing and types of resources
being used. For information on the minimum recommended installed memory for various printing
requirements on each supported printer, refer to the appendix on memory requirements and
recommendations in the IPDS Emulation User's Guide.
D. The host may be downloading more IPDS resources than can be held in the printer's memory. Add more
memory to the printer. Requirements vary greatly according to type of printing and types of resources being
used. For information on the minimum recommended installed memory for various printing requirements on
each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS
Emulation User's Guide.
Problem 4: Memory Full; 38I Memory Full
Sometimes the message 38I Memory Full or Memory Full displays on the printer control panel and the
connection with the printer is lost. What do these messages mean? What should I try?
2
3
57