Lexmark X644E Setup Manual page 40

Card for ipds and scs/tne ipds printer and host
Hide thumbs Also See for X644E:
Table of Contents

Advertisement

IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server
TCP/IP Settings
Parameter
Address
(Address available from your network administrator)
Netmask
(Appropriate netmask for your network)
Gateway
(IP address of your IP gateway)
Enable DHCP
(On, if you use a DHCP server.)
(Off, if you set the IP address another way.)
Enable RARP
(On, if you use a RARP server.)
(Off, if you set the IP address another way.)
Enable BOOTP
(On, if you use a BOOTP server.)
(Off, if you set the IP address another way.)
AutoIP
(Default is On. This is the recommended setting.)
WINS Server Address 157.184.100.20
(Address of your WINS Server)
DNS Server Address
(Address of your DNS Server)
6
Save/submit any changes and return to the Ready screen.
7
To verify the new print server settings, print a Network Setup Page. Using the control panel MENU/Menus,
select Reports > Network Setup Page. This can be Network Setup Page, Network 1 Setup Page, or
Network 2 Setup Page. Note that the Network Job Timeout is identified as End-of-job Timeout on this
report.
Step 5
Configure the Printer's Network Job Timeout
Note:
If you specified Port 5001 or 9600 as the TCP/IP port number in the printer created in Step
you do not need to configure the printer's Network Job Timeout. Go directly to Step
Important! If you specified Port 9100 as the TCP/IP port number, the printer's Network Job Timeout must be
manually disabled by setting it to "0" (or to "Disable"). This is necessary to allow the host's Release Timer
value or the printer's IPDS Timeout value to control when print jobs from another protocol, interface, server, or
host can be started. It also prevents the printer from ending the IPDS session if communication is delayed
between the host and printer.
Additional information on the printer IPDS Timeout value may be found in the IPDS Emulation User's Guide.
Follow these steps to disable the printer's Network Job Timeout from the control panel:
Value
157.184.67.102
255.255.255.0
157.184.67.1
On or Off
On or Off
On or Off
On or Off
157.184.115.7
2 [page
36],
6 [page 41]
.
40

Advertisement

Table of Contents
loading

Table of Contents