Lexmark X644E Setup Manual page 39

IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server
c) Now select Tuning Options.
The Job Interval Shutdown Timer indicates the number of seconds PSF/2 waits before shutting down when
there are no jobs in the queue. In other words this is the amount of time that PSF/2 remains active after the last
job is printed.
Valid values: integers 1 to 9999
1-9998 time in seconds to wait between jobs
9999 wait indefinitely for the next job to be received.
Step 4 Configure the Printer's Print Server TCP/IP Settings
To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings
must be verified. You can verify these settings from the printer control panel as shown below.
1 From a Ready state press the MENU button (printers) or touch
2 Use the navigation buttons or icons
3 Select Network/Ports.
TIp: To do this on printers, press the Select button
4 Now you will see a list of menus. Select the TCP/IP menu.
5 Use the navigation buttons or icons to scroll through the options. Check each of the following settings and
change them as needed to configure TCP/IP communication.
TCP/IP Settings
Parameter
Activate
(Printers: Must
cations. MFPs: not displayed.)
to scroll to Network/Ports.
Value
On
be "On" to enable TCP/IP communi-
(Menus on MFPs).
; on MFPs just touch Network/Ports.
39