Lexmark X644E User Manual page 91

Connect Status: Primary status messages
Reconnecting session
Session Disconnected and Halted
Trying to connect
Connect Status: Last response messages
Lst Rsp:No support for that device-type
Lst Rsp:Name unknown to server
Lst Rsp:The requested device is in use
Lst Rsp:Terminal/Printer name mismatch
Operations - TN3270E SETUP: NETWORK SETUP > Connect Status
Comments
The Telnet session was disconnected. The SCS/TNe Emulation is
attempting to reconnect.
All active Telnet sessions have been disconnected. Power the
printer Off and On or select Menus > Option Card Menu > SCS/
TNe MENU > COMMON SETUP > Reset TN Session > Reset TN
Ses. to reconnect.
The SCS/TNe Emulation is contacting the host or SNA Server to
establish a TCP/IP connection.
Comments
The Telnet server does NOT support the device type requested by
the SCS/TNe Emulation. Select another device type with the
Type option.
The LU Name requested by the SCS/TNe Emulation is unknown to
the server or not correctly configured. Check the configuration of
the host and of the SCS/TNe Emulation.
The device requested by the SCS/TNe Emulation is used by
another device. Check the configuration of the host and of the SCS/
TNe Emulation.
The device name or resource name requested by the SCS/TNe
Emulation is incompatible with the requested device type. Change
the device name or device type on the host or check the configu-
ration of the host and of the SCS/TNe Emulation.
Device
91