Lexmark X644E User Manual page 25

Remote Configuration Using A Browser: How to Use the Browser Interface
If a session has not been disconnected, check to see if jobs
are being received on this session. Wait for the jobs to finish
printing or end the session from the host. If no jobs are
printing, you may need to end and reset the session at the
host.
8
Return to SCS/TNe Settings.
9
Select one of the TN3270E or TN5250E menus.
10
All option values which may be changed remotely will be
displayed. Change option settings as desired.
11
Select the Submit button at the bottom of the page. The
Submit button sends the new values to the printer. These
values are saved in the printer and will become active when
the next session is started.
12
The browser will then display a confirmation that settings
have been submitted.
13
Repeat with the other TN3270E or TN5250E menus as
desired.
14
Select the TNe Common menu.
15
Reset all sessions by clicking on the Execute button next to
the Reset TN Sess item.
25