Lexmark X644E User Manual page 58

AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server
3
Set the TCP/IP option values shown in the table below.
Select Menus > Network/Ports > TCP/IP. You will need to
contact your network administrator for several of the values.
You will need to contact your network administrator for
several of the values.
TCP/IP Option Value
Address
Netmask
Gateway
Enable DHCP On or Off On, if you use a DHCP server.
Description
Address available from your network
administrator.
Netmask for your network. Contact your network
administrator.
Address of the IP gateway. Contact your network
administrator.
Off, if you set the IP address another way.
58