Lexmark X644E User Manual page 46

SERVER INFO
Option Default Value
Name / IP
Use IP Address
Address
IP Address
0.0.0.0
Hostname
[undefined]
TN Server Port
23
Mainframe Installation Setup: Task 5 - Configuring the SCS/TNe Emulation
The table below shows the factory default settings and
recommended settings. The option setting values found in
the table are described in section
SERVER INFO Menu: Options Overview" on page
Recommended Value Comments
Check with your system administrator whether you need to
specify the specific IP address or the name of the host which
the printer will contact to receive SCS jobs.
The TNe Server's IP In order to make a connection to the mainframe host, an IP
address address must be entered or a hostname defined.
If you selected Use IP Address in the
option, enter the appropriate IP Address here.
(This option is not used if you selected Use Hostname).
A hostname to look In order to make a connection to the mainframe host, an IP
up on a DNS server: address must be entered or a hostname defined.
(up to 16 characters) If you selected Use Hostname in the
option, enter the appropriate hostname here.
(This option is not used if you selected Use IP Address.)
23 Check with your system administrator to determine whether
another TCP port number is defined for the Telnet service.
"NETWORK SETUP>
93.
Name / IP Address
Name / IP Address
46