Lexmark X644E User Manual page 287

Appendix - COR/APO Logic (TN5250e): Details
PAGLNG = A4
2
If the page format stated in the FCB is within (or equal to) the
page size settings of the
the page size is "valid". In that case the printout will be in
landscape provided the page length is smaller than the width,
otherwise it will be in portrait. In both cases the font selected
by the system is used.
3
If either the page width or the page length from the system
exceeds the page size stated in the SCS/TNe Emulation the
page size is "invalid". The result is a compressed landscape
printout by means of the COR algorithm in the SCS/TNe
Emulation.
"Vertical spacing" is reduced from normal line spacing
•
to a percentage value according to the
option setting. Refer to section
Option 127)" on page
Margins (offset) are set according to the
•
and
TOPOFFCOR
Margin COR (IDB Opt. 80 & 81)" on page 232
section "Left Margin COR (IDB Opt. 78 & 79)" on
page 230.
and
PAGWDT = A4
and
PAGLNG PAGWDT
"COR LSI Reduc (IDB
205.
option settings. Refer to section
option settings,
LINSPRED
LFTOFFCOR
"Top
and to
287