Lexmark X644E User Manual page 65

Option Default Value
Name / IPaddress #
Use IP#
Address
IP # Address
0.0.0.0
Hostname #
[undefined]
Server # TN Port
23
AS/400 and iSeries Installation Setup: Task 4 - Configuring the SCS/TNe Emulation
You will need to check with your system administrator. The
option setting values found in the table are described in
section "CONNECTION # > SERVER # INFO Menu: Options
Overview" on page
Recommended Value Comments
Check with your system administrator whether you need
to specify the specific IP address or the name of the host
which the printer will contact to receive SCS jobs.
The host's IP In order to make a connection to the host, an IP address
address must be entered or a hostname defined.
If you selected Use IP# Address in the
#
(This option is not used if you selected
Use Hostname #.)
Host name on DNS In order to make a connection to the host, an IP address
server must be entered or a hostname defined.
(up to 16 characters) If you selected Use Hostname # in the
#
(This option is not used if you selected
Use IP# Address.)
23 Check with your system administrator. Another TCP port
number may be defined for the Telnet service.
163.
option, enter the appropriate IP Address here.
option, enter the appropriate hostname here.
Name / IPaddress
Name / IPaddress
65