Lexmark X644E User Manual page 162

Connect # Status: Last response messages
Lst Rsp:8902:Device not available
Lst Rsp:8903:Device not valid for session
Lst Rsp:8906:Session initiation failed
Lst Rsp:8907:Session failure
Lst Rsp:8910:Controller not valid
Lst Rsp:8916:No matching device found
Lst Rsp:8917:Not authorized to object
Lst Rsp:8918:Job canceled
Lst Rsp:8920:Object partially damaged
Lst Rsp:8921:Communication error
Lst Rsp:8922:Negative response received
Lst Rsp:8923:Start-up record incorrectly
Lst Rsp:8925:Creation of device failed
Lst Rsp:8928:Change of device failed
Lst Rsp:8929:Vary on or vary off failed
Lst Rsp:8930:Message queue does not exist
Operations - TN5250E SETUP: CONNECTION # > Connect # Status
Comments
The requested device is not available on the system. It has
probably been assigned to another Telnet session.
Check with system operator.
Check with system operator.
Check with system operator.
Check with system operator.
An exisisting device configuration was not found and the auto-
configuration of virtual devices did not allow any new device
descriptions to be created.
Check with system operator.
Check with system operator.
The device description object on the host has been damaged.
Check with system operator.
The SCS/TNe Emulation was not able to establish a Telnet session.
It will try again automatically.
Check with system operator.
The SCS/TNe Emulation device was not created succesfully.
Check with system operator.
Check with system operator.
Check with system operator.
162