Table of Contents
Advertisement
Instructions – 4080L
Step 8 – Mount Ladder Stop
Bolt the ladder stop to the front bow in the orientation shown using two 3/8" x 1" carriage
bolts, two 3/8" flat washers and two 3/8" lock nuts.
Adjust clamp on bracket to fit firmly against your ladder.
TIGHTEN.
*Shown without some parts for clarity*
After installation, adjust clamps to fit firmly against the ladder.
GO BACK AND ENSURE ALL HARDWARE IS TIGHT
INSTALLATION IS NOW COMPLETE.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Page 15
Advertisement
Table of Contents
