Step 5 - Mount Angle Bracket - Kargo Master 4080L Instruction Manual

 Mount an end plate at the rear of the tube as shown.
 Leave one square slot open at the rear of the side tube.
 Bolt to the front and rear bow using 5/16" x 2" carriage bolt, a 5/16" flat washer and a
5/16" lock nut.
 Snug tighten, but allow movement.
Step 5 – Mount Angle Bracket
 Place the angle bracket on top of the installed bows with the long flange towards the center
of the vehicle. Do NOT install any hardware.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 4080L
Page 12