Kargo Master 4080L Instruction Manual page 14

 Insert plastic bushings into the angle bracket and the ladder stop installed in Step 4, with the
large flanges of the bushings towards each other and to the inside of the brackets as shown.
 Insert the
clamp tube
into the
previously
installed
bushings in
the
prientation
shown.
 Bolt the angle bracket to
the front and rear bow
using 3/8" x 1" carriage
bolts, 3/8" flat washers and
a 3/8" lock nuts as shown.
 Be sure the bushings
CANNOT come out.
 TIGHTEN.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 4080L
Page 13