Page 2
Assembly Instructions – 40641 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Page 3
Assembly Instructions – 40641 Parts Hardware For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2...
Page 4
Assembly Instructions – 40641 Step 1 – Bolt Together • Place both pieces (A&B) flat on the ground or table. Be sure to have the flanges facing upward so you can access the bolt holes. • Bolt together using a 1/4"-20 x .625” flanged hex bolt and a 1/4”-20 flanged nyloc nut.
Page 5
Assembly Instructions – 40641 • Repeat 3 more times as shown. Be sure to insert the washers between the panels. • Some like to leave bolts snug tight to allow movement untill partition is installed into vehicle. Follow instructions of desired wing kit to install into vehicle.