Step 6 - Mount Handle; Step 7 - Mount Latch - Kargo Master 4080L Instruction Manual

Step 6 – Mount Handle
 Bolt the handle to the clamp tube using a 3/8" x 3" hex head, a 3/8" flat washer, 3/8" nylon
washer, a 3/8" curved washer and a 3/8" lock nut. The nylon washer goes in between the
clamp tube and the handle. The curved washer fits the contour of the tube on the handle.
 TIGHTEN, but do not over tighten.
Step 7 – Mount Latch
 Bolt the latch to the round tube installed in Step 4 through the vacant slot using 5/16" x 2"
carriage bolt, 5/16" flat washer and a 5/16" lock nut.
 TIGHTEN.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 4080L
Page 14