Table of Contents
Advertisement
Ice cube is very thin.
Ice cube is too thick.
"FULL" indicator is on.
Ice making cycle is
normal, but there is no
ice cube produced.
Ambient temperature is too
high.
Air circulation around the
unit is not good.
Ambient temperature is too
low.
The ice storage bin is full of
the ice.
The temperature of ambient
or water in water tank is too
high.
Refrigerant leakage.
Cooling system tube is
clogged.
Move the unit to low
temperature space or lengthen
the time of each ice making
cycle.
Make sure there is more than
20cm space between the unit
back & front and any obstacles.
Reduce the time of each ice
making cycle.
Remove some ice cubes.
Move to the place with
temperature lower than 32° and
change to the low temperature
water.
Call a qualified technician.
Call a qualified technician.
29
Advertisement
Table of Contents
