Kogan KA45CICEMKA User Manual page 17

Connect the water supplying hose to the unit:
1. First remove the tape on the water inlet port for water supply (B) located at the rear
of the unit, using a finger on your other hand press the clipper out.
2. Insert the one end of the white-water hose into the water inlet port and push inward
completely. Reinstall the clipper. The water hose connection is now complete.
Water inlet port
Connecting the water drainpipe
Pull out the black water drainage cap (A) and connect the white drainage pipe. The other
end of this pip should be routed to the main water drainage pipeline.
Unit Rear View
Step 1: Remove the tape
and clipper
1. Remove tape
2. Remove the clipper
Step 2: Insert the water
hose and re-install clipper
4. Re-install the
clipper
3. Insert White water
hose (accessory)
17