Ice-making and its water tank parts
A Water dividing pipe
B Evaporator (ice-making module)
C Ice full detecting board
D Water tank
E Water supplying pipe
F Cover board on the right side of the evaporator
G Water level switch installing plate
Water drainpipe of the
H
water tank
I Water pump
J Water level detecting switch
10
Water will flow out from the nice holes. If no water flows out,
can be disassembled and cleaned.
Use to detect the inner cabinet is full of ice or not and to
check the ice-harvest process is completed.
When ice-making, this pipe should be clamped in the slot of
the water tank wall. When draining, this pipe should be
pulled out.