Connect the water hose to the water faucet of the water main supply system
1. Install the supplied water quick-connector to the water faucet.
2. Remove the clipper from the water quick-connector, insert the other end of the water
hose into this quick-connector port completely, then reinstall the clipper.
Note: The water faucet should be supplied by the customer.
Important: The water pressure of main water supply system must be 0.04-0.6 MPa.
Step 1:
Quick connector & the water faucet
Step 3:
Insert the water hose completely
18
Push inwards
Step 2:
Screw the Quick connector on the water
faucet by the screw thread & remove the
clipper
Step 4:
Install back the clipper
Remove the
clipper first