Table of Contents
Advertisement
F "+", "-" button
G "88" digital window
H "ON/OFF" button
I
"TIMER CLEAN" button
12
• Used to adjust the ice-making process duration period.
The default setting is zero, pressing the "+" or "-" will
change the time in one-minute increments.
• Used to adjust the delay period of the timer. The
default setting is zero, pressing the "+" or "-" will
change the time in one-minute increments. .
• Solid light: Normal condition, displays ambient
temperature.
• Flashing light: Time left in of each process (ice-making
cycle, self-cleaning program, etc.).
• When the unit is off, press this button to turn on the
unit.
• During the Self-cleaning program or normal ice-
making state, press this button to turn off the unit.
• If the unit is set with the Timer, press this button to
cancel the Timer setting.
• When the unit is making the ice cube, press this button
for more than 5 seconds, the unit will switch to ice
harvesting.
• Quick press: To enter the Timer setting program.
• Press and hold this button for more than 5 seconds, to
enter the cleaning program.
Advertisement
Table of Contents
