HEIDENHAIN EIB 700 Operating Instructions Manual page 20

2.5 General safety precautions
The safety of any system incorporating the
use of this product is the responsibility of the
assembler or installer of the system.
The product supports the use of a wide
variety of peripheral devices from different
manufacturers. HEIDENHAIN cannot make any
statements on the specific safety precautions
to be taken for these devices. The safety
precautions provided in the respective
documentation must be observed. If there is
no documentation at hand, it must be obtained
from the manufacturers concerned.
The specific safety precautions required for the individual
activities to be performed on the product are indicated in
the respective sections of these instructions.
2.5.1 Symbols on the product
The following symbols are used to identify the product:
Symbol Meaning
Functional ground connection as per
IEC/EN 60204-1. Observe the informa-
tion on installation.
2.5.2 Electrical safety precautions
WARNING
Hazard of contact with live parts when opening the
product.
This may result in electric shock, burns or death.
Never open the housing
Only the manufacturer is permitted to access the
inside of the product
NOTICE
Damage to internal parts of the product!
If you open the product, the warranty and the guarantee
will become void.
Never open the housing
Only the product manufacturer is permitted to
access the inside of the product
22
WARNING
Hazard of dangerous amount of electricity passing
through the human body upon direct or indirect
contact with live electrical parts.
This may result in electric shock, burns or death.
Work on the electrical system and live electrical
components is to be performed only by trained
specialists
For power connection and all interface connections,
use only cables and connectors that comply with
applicable standards
Have the manufacturer exchange defective electrical
components immediately
Regularly inspect all connected cables and all
connections on the product. Defects, such as loose
connections or scorched cables, must be removed
immediately
NOTICE
Electrostatic discharge (ESD)!
This device contains electrostatic sensitive components
that can be destroyed by electrostatic discharge (ESD).
It is essential to observe the safety precautions for
handling ESD-sensitive components
Never touch connector pins without ensuring proper
grounding
Wear a grounded ESD wristband when handling
device connections
2.5.3 Safety precautions regarding data protection
NOTICE
Data transfer is not encrypted
Malicious software (viruses, Trojans, malware or worms)
can cause changes to data records and software.
Manipulated data records and software can lead to an
unexpected behavior.
It is your responsibility to ensure that all required data
protection provisions have been made at your company.
HEIDENHAIN | EIB 700 | 03/2022