Connectors At Front Panel - Hilberling PT-8000 Operating Manual

C–6
Miscellaneous
DC-Fuse 13.8 V DC circuit breaker for final PA rated 13,8 V / 25 Amp. for PT-8000C and
50 V / 15 Amp. or 100 V / 15 Amp. for PT-8000A/B
TX-ALC Sensitivity of ALC input (J17, pin 6) from external PA to reduce TX power out.
AUDIO IN Sensitivity of Audio data input (J20, pin 2) – rated 0 dBm.
4.2

Connectors At Front Panel

1 2
Connection Sockets 1 ... 3
Nr. Name
1 MIC-PTT Microphone Socket
2 PHONE EIA-453 / IEC 60603-11
3 CW-KEY EIA-453 / IEC 60603-11
Picture 4
3
Typ
Microphone connector for Hilberling T9 and Data input 0 dBm
8-pol
Headphones low impedance (8 Ω). When plugged in the speaker(s) will be cut off.
TRS 6.3 mm NOTE: pushing the volume controls for MAIN and SUB will switch on the speaker(s)
momentarily
Keyer for CW
TRS 6.3 mm
Part C Installation And Operation
Beschreibung
Table 6