If the soft key SET RPT is depressed
Changing to a different mode will terminate SET RPT as well.
Numerical frequency input not possible
10.4 DATA Transmission
PT-8000 A · B · C User Manual
•
SET RPT will be inverse
•
VFO display will show actual transmit frequency
•
Set VFO to desired transmit frequency hence
define the shift within a tuning range from 0 ...
2.000kHz.
The frequency resolution selected for the VFO
will apply for this setting.
•
Pressing the SET RPT pushbutton again will
terminate the SET RPT modus.
C–27